Shaping the future together

Internal cutting

of multi-string casings and piles

ANT offers turnkey offshore cutting spreads, modular cutting tools and accessories for cold cutting of subsea and topside structures.
Our integrated systems can be individually tailored to your needs.
Internal cutting

Fields of application

  • Multi-string casings
  • Casings and single piles
  • Water depth up to 250 m

Special Features

  • Most powerful & precise jet at 36.000 psi
  • Optional dewatering module
  • Air surrounded jet
  • High cut quality: with or without cement
  • Verified and proven water depth = 150 m, with dewatering module 250 m
  • 3S cut verification system real time cut verification

What makes WAS cutting tools of ANT so specific?

Besides the general advantages of the Water Abrasive Suspension (WAS) cutting technology, ANT has developed specific solutions to further improve performance of the Downhole Cutting Heads (DCHs) in great depth and challenging conditions of internal cuts. Even concentric multistring dual bore wells can be completely cut in a single pass.

ANT Offshore - Internal Cutting | Air surrounded jet

Cutting examples

Offshore job in the gulf of Mexico

ID 7 5/8″ OD 36″ / Water depth 60′ / 20m
average casing setup, cemented
average cutting speed 30° / h, cutting time 12h

Offshore job in the
Chinese Sea / Bohai Bay

ID 13 3/8″ OD 30″ / Water depth 60′ / 20m
average casing setup, cemented
average cutting speed 80° / h, cutting time 4,5h

Mock-up test

ID 13 3/8″ OD 30″ / Water depth 15′ / 4m
average casing setup, cemented
average cutting speed 100° / h, cutting time 3,5h

Decommissioning of offshore structures
“ANTs products and service is excellent. Using their tools for our Offshore projects is lucrative and practicable.”
Wang Chao – CNOOC
Reference

Turnkey offshore WAS cutting spread

ANT Offshore - Internal Cutting | DCH
Various types of Downhole Cutting Head (DCHs) and Pile Cutting Head (mounted on skid), some with optional packer module CAir.
A-frame with goose neck*
Winch* and Umbilical
Air compressor*
Abrasive Mixing Units (AMUs) with Lifting Unit and external Switch Box
Control System and Hydraulic Power Unit

High Pressure Pump*

Working Container*
Abrasive Container*
External tugger wire e.g. lifting device**
ANT Offshore - Internal Cutting | DCH
  1. Various types of Downhole Cutting Head (DCHs) and Pile Cutting Head (mounted on skid), some with optional packer module CAir.
  2. A-frame with goose neck*
  3. Winch* and Umbilical
  4. Air compressor*
  5. Abrasive Mixing Units (AMUs) with Lifting Unit and external Switch Box
  6. Control System and Hydraulic Power Unit
  7. High Pressure Pump*
  8. Working Container*
  9. Abrasive Container*
  10. External tugger wire e.g. lifting device**

Overview of ANT’s Water Abrasive Suspension (WAS) cutting spread

*can be provided by ANT or customer,
**provided by customer
*can be provided by ANT or customer,
**provided by customer

Key Features

  • Turnkey WAS cutting spread
  • Small footprint
  • Modular tools
  • Smart monitoring system
  • High quality materials
  • Reliable and proven technology

Your Advantages

  • Control and feedback
  • High flexibility
  • Time savings
  • Cost reduction
  • Maximum safety

You are currently viewing a placeholder content from YouTube. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.

More Information
Unblock content Accept required service and unblock content

You are currently viewing a placeholder content from YouTube. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.

More Information
Unblock content Accept required service and unblock content

Core components of
the WAS Cutting Spread

While some components might also be provided by customers, there are several essential core components of ANT included in our standard turnkey Water Abrasive Suspension (WAS) cutting spread.

Abrasive Mixing Units (AMUs)

For the challenging cutting tasks in Offshore applications the most powerful Abrasive Mixing Units with a pressure level of 2,500 bar are suitable.

Our standard WAS offshore spread comes with an ATEX Zone 2 certified complete AMU TWIN 2500-100 system which ensures safe operation and transport as well as interruption-free cutting.

The Lifting Unit consists of a DNV 2.7-1 certified lifting frame and a lifting device which enables fully automated and safe lifting of the two AMU 2500-100. The Switch Box switches the cutting operation from an empty to the other AMU to enable refilling of abrasive without interrupting the cutting process.
While some components might also be provided by customers, there are several essential core components of ANT included in our standard turnkey Water Abrasive Suspension (WAS) cutting spread.

You are currently viewing a placeholder content from YouTube. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.

More Information
Unblock content Accept required service and unblock content

Cutting Devices: Downhole Cutting Heads (DCHs) and Pile Cutting Head (PCH)

DCHs and PCH are sophisticated devices for internal cutting of multistring casings and piles. Depending on outer diameter of the inner casings different types of DCH / PCH are available:
Overview of Downhole Cutting Heads (DCHs) and Pile Cutting Head (PCH)
Overview of Downhole Cutting Heads (DCHs) and Pile Cutting Head (PCH)
  • 7”: DCH 1
  • 9 5/8“, 13 3/8, 16 and 20”: DCH 2
  • 16” to 36”: PCH
  • 30” to 50” and 50” to 72”: DCH 3
  • 70” to 96” and 96” to 118”: DCH 4

By special features like stepless clamping and different nozzle holders they can be adjusted to a wide range of casings. For depth > 150 m an optional CAir (Cutting in Air) System can further improve cutting performance. It is offered for DCH 1 and DCH 2.

DCHs and PCH are operated with a Control System, Hydraulic Power Unit and Air Compressor which are assembled in DNV 2.7-1 certified containers.

3S Cut Verification System

Offshore subsea cutting implies being “blind”, especially during internal cuts of multistring casings. Our 3S cut verification system makes the whole cutting process visible in real time. A variety of sensors are used to display the cut in real time on a monitor, giving the operator reliable feedback and full control during the entire cutting process.

ANT Offshore - Internal Cutting | 3S Cut
ANT’s 3S Cut Verification System gives real time feedback during the cutting process

You are currently viewing a placeholder content from YouTube. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.

More Information
Unblock content Accept required service and unblock content

Umbilical

The umbilical includes hydraulic and pneumatic hoses as well as electric cables which provide the supply for DCHs and PCH. In ANT’s turnkey WAS cutting spread it comes as complete Winch Umbilical Reel System, including the Umbilical, Umbilical Reel Winch, Gooseneck and a transport frame.
The Umbilical Reel Winch enables safe, easy and time saving spooling of up to 350 m umbilical while the Gooseneck provides a safe guide rail for the umbilical. For easy transport this system is delivered in DNV 2.7-1 certified base frame.
Liam Toovey Business Development Manager

Any questions?

Our Sales Team is always happy to help. You can reach us by phone from Monday to Friday between 8 am and 4 pm.

+44 (0)7904 244 738
decom@ant-ag.com

Blog

ANT Applied New Technologies AG
Hinter den Kirschkaten 32
D-23560 Lübeck

Tel.: +49 (0)451 5 83 80-0
Email: info@ant-ag.com